And add a note how to perform side-channel free error stack handling.
Signed-off-by: Hubert Kario <hkario@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24159)
Signed-off-by: fanqiaojun <fanqiaojun@yeah.net>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24128)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
According to FIPS 140-3 IG 10.3.A Additonal Comment 1, a PCT shall be
performed consistent with the intended use of the keys.
This commit implements PCT for EDDSA via performing sign and verify
operations after key generated.
Also use the same pairwise test logic in EVP_PKEY_keygen and
EVP_PKEY_pairwise_check for EDDSA in FIPS_MODULE.
Add OSSL_SELF_TEST_DESC_PCT_EDDSA to OSSL_PROVIDER-FIPS page.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23408)
It would be helpful to be able to generate RSA's dmp1/dmq1/iqmp values
when not provided in the param list to EVP_PKEY_fromdata. Augment the
provider in ossl_rsa_fromdata to preform this generation iff:
a) At least p q n e and e are provided
b) the new parameter OSSL_PARAM_RSA_DERIVE_PQ is set to 1
Fixes#21826
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21875)
Fix a typo from asymmmetric to asymmetric
CLA: trivial
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23164)
If a name is passed to EVP_<OBJ>_fetch of the form:
name1:name2:name3
The names are parsed on the separator ':' and added to the store, but
during the lookup in inner_evp_generic_fetch, the subsequent search of
the store uses the full name1:name2:name3 string, which fails lookup,
and causes subsequent assertion failures in evp_method_id.
instead catch the failure in inner_evp_generic_fetch and return an error
code if the name_id against a colon separated list of names fails. This
provides a graceful error return path without asserts, and leaves room
for a future feature in which such formatted names can be parsed and
searched for iteratively
Add a simple test to verify that providing a colon separated name
results in an error indicating an invalid lookup.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/23110)
The hmac flags OSSL_MAC_PARAM_DIGEST_NOINIT and
OSSL_MAC_PARAM_DIGEST_ONESHOT dont add any real value to the provider,
and the former causes a segfault when the provider attempts to call
EVP_MAC_init on an EVP_MAC object that has been instructed not to be
initalized (as the update function will not have been set in the MAC
object, which is unilaterally called from EVP_MAC_init
Remove the tests for the above flags, and document them as being
deprecated and ignored.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/23054)
The EVP interface explicitly allows in-place encryption/decryption,
but this fact is just 'partially' documented in `EVP_EncryptUpdate(3)`
(pun intended): the manual page mentions only operation failure in
case of 'partial' overlaps. This is not even correct, because
the check for partially overlapping buffers is only implemented
in legacy code paths.
Currently, in-place encryption/decryption is only documented for
RSA (`RSA_public_encrypt(3)`) and DES (`DES_ecb_encrypt(3)`), as
well as in the provider interface (`provider-cipher(7)`).
This commit amends `EVP_EncryptUpdate(3)` and `provider-cipher(7)`
to make the front-end and back-end documentation consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22875)
Do not allow mid-expression line breaks.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22814)
"d_i in RFC8017" -> "d_i" in RFC8017
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22868)
The macro for "block-size" is OSSL_MAC_PARAM_BLOCK_SIZE, and this
parameter is not settable. Refer to the "customization string" rather
than the "custom value" (in the Blake2 spec, this is called the
personalization string).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22763)
KECCAK-KMAC-128 and KECCAK-KMAC-256 are extendable output functions
that have been defined because they are convenient for implementing
KMAC. Give definitions for them so that users aren't left to figure
that out themselves. KECCAK-KMAC-128 is very similar to SHAKE-128,
and KECCAK-KMAC-256 is very similar to SHAKE-256.
Related to #22619.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22755)
Make the documentation match reality. Add lots of missing algorithms.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22694)
Because the quicserver utility supports expressly listening in ipv4/6
mode, its possible/likely that the server will listen on an ipv4
address, while the clients will connect via ipv6, leading to connection
failures.
Augment quic demo clients to afford them the same -6 option that the
server has so that connection family can be co-ordinated
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22577)
The upper limit of the output size is the default output size of
the respective algorithm variants.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22659)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22636)
As per recommendation by jfinkhaeuser, this documents the defaults for
KMAC-128 as 32 and for KMAC-256 as 64. The code already accomodates for
these values, so no changes are needed there.
Fixes#22381
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22614)
The demo code has changed to accept the hostname/port on the command line.
We update the tutorials to keep in sync with the demo code.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22552)
We move some of the "why QUIC" content into the guide and just provide a
summary in README-QUIC.md.
We also clarify how to use s_client with QUIC.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22505)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22459)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22446)
BLAKE2 is not really an extensible output function unlike SHAKE
as the digest size must be set during the context initialization.
Thus it makes no sense to use OSSL_DIGEST_PARAM_XOFLEN.
We also need to adjust EVP_DigestFinal_ex() to query the
OSSL_DIGEST_PARAM_SIZE as gettable ctx param for the size.
Fixes#22488
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22491)
The code for the quic demos (from the openssl guide) is presented as
modifications of tls-client-block.c. Make it so that the quic code
better matches the tls code (drop unneeded assignments to "ret", use
the same comment on SSL_connect(), add the same printf() statement).
Also fix some minor typos.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22483)
The `get_user_{entropy,nonce}` callbacks were add recently to the
dispatch table in commit 4cde7585ce. Instead of adding corresponding
`cleanup_user_{entropy,nonce}` callbacks, the `cleanup_{entropy,nonce}`
callbacks were reused. This can cause a problem in the case where the
seed source is replaced by a provider: the buffer gets allocated by
the provider but cleared by the core.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22423)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20131)
Tomas Mraz
Hongren Zheng
Hubert Kario
slontis
Richard Levitte
Neil Horman
Hugo Landau
pohsingwu
James Muir
rilysh
Dimitri Papadopoulos
Dr. David von Oheimb
Matthias St. Pierre
Jamie Cui
Matt Caswell
Dmitry Belyavskiy
Michael Hinz
Pauli
Simo Sorce