Fix a typo that is confusing for newcomers.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20909)
We had a test for a handshake record appearing before epoch change, and
a test for an app data record appearing before Finished - but not one for
the app data record appearing before epoch change.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20628)
Ensure we are testing a handshake that includes a HelloVerifyRequest and
what happens if we drop it.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18654)
Add a test to ensure that a connection started via DTLSv1_listen() can
be completed through to handshake success. Previous DTLSv1_listen()
testing only tested the function itself and did not confirm that a
connection can actually be achieved using it.
This is important to test some codepaths being affected by the record layer
refactor.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
If the first app data record arrives before the Finished message we should
be able to buffer it and move on to the Finished message.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18868)
dtlstest.c needs some adjusting to handle no-dtls1_2 since commit
7bf2e4d7f0 banned DTLSv1 at the default security level - causing the
test to fail.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18848)
Test that if we receive a packet from the next epoch, we can buffer it
and still use it.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18601)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
dtlstest needed some adjustments in the event that DTLSv1.2 is disabled.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
We test that sending a Finished message instead of a ClientHello results
in an unexpected message error.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14930)
Various sections of code assumed that at least one of dh or ec would be
available. We also now also need to handle cases where a provider has
a key exchange algorithm and TLS-GROUP that we don't know about.
Fixes#13536
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13549)
We support a number of different ways of setting temporary DH params. We
should test that they all work correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
We also don't load the default provider into the default libctx to make
sure there is no accidental "leakage".
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11508)
PR#6975 added the ability to our test framework to have common options to
all tests. For example providing the option "-test 5" to one of our test
programs will just run test number 5. This can be useful when debugging
tests.
Unforuntately this does not work well for a number of tests. In particular
those tests that call test_get_argument() without first skipping over these
common test options will not get the expected value. Some tests did this
correctly but a large number did not.
A helper function is introduced, test_skip_common_options(), to make this
easier for those tests which do not have their own specialised test option
handling, but yet still need to call test_get_argument(). This function
call is then added to all those tests that need it.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10975)
It replaces apps/server.pem that used a sha1 signature with a copy of
test/certs/servercert.pem that is uses sha256.
This caused the dtlstest to start failing. It's testing connection
sbetween a dtls client and server. In particular it was checking that if
we drop a record that the handshake recovers and still completes
successfully. The test iterates a number of times. The first time
through it drops the first record. The second time it drops the second
one, and so on. In order to do this it has a hard-coded value for the
expected number of records it should see in a handshake. That's ok
because we completely control both sides of the handshake and know what
records we expect to see. Small changes in message size would be
tolerated because that is unlikely to have an impact on the number of
records. Larger changes in message size however could increase or
decrease the number of records and hence cause the test to fail.
This particular test uses a mem bio which doesn't have all the CTRLs
that the dgram BIO has. When we are using a dgram BIO we query that BIO
to determine the MTU size. The smaller the MTU the more fragmented
handshakes become. Since the mem BIO doesn't report an MTU we use a
rather small default value and get quite a lot of records in our
handshake. This has the tendency to increase the likelihood of the
number of records changing in the test if the message size changes.
It so happens that the new server certificate is smaller than the old
one. AFAICT this is probably because the DNs for the Subject and Issuer
are significantly shorter than previously. The result is that the number
of records used to transmit the Certificate message is one less than it
was before. This actually has a knock on impact for subsequent messages
and how we fragment them resulting in one less ServerKeyExchange record
too (the actual size of the ServerKeyExchange message hasn't changed,
but where in that message it gets fragmented has). In total the number
of records used in the handshake has decreased by 2 with the new
server.pem file.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #10784
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9288)
During a DTLS handshake we may need to periodically handle timeouts in the
DTLS timer to ensure retransmits due to lost packets are performed. However,
one peer will always complete a handshake before the other. The DTLS timer
stops once the handshake has finished so any handshake messages lost after
that point will not automatically get retransmitted simply by calling
DTLSv1_handle_timeout(). However attempting an SSL_read implies a
DTLSv1_handle_timeout() and additionally will process records received from
the peer. If those records are themselves retransmits then we know that the
peer has not completed its handshake yet and a retransmit of our final
flight automatically occurs.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8047)
Drop a record from a handshake and check that we can still complete the
handshake. Repeat for all records in the handshake.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6170)
Have all test programs using that function specify those versions.
Additionally, have the remaining test programs that use SSL_CTX_new
directly specify at least the maximum protocol version.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5663)
that needed test_main now works using the same infrastructure as tests that used
register_tests.
This meant:
* renaming register_tests to setup_tests and giving it a success/failure return.
* renaming the init_test function to setup_test_framework.
* renaming the finish_test function to pulldown_test_framework.
* adding a user provided global_init function that runs before the test frame
work is initialised. It returns a failure indication that stops the stest.
* adding helper functions that permit tests to access their command line args.
* spliting the BIO initialisation and finalisation out from the test setup and
teardown.
* hiding some of the now test internal functions.
* fix the comments in testutil.h
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3953)
Certain callback APIs allow the callback to request async processing
by trickling a particular error value up the stack to the application
as an error return from the handshake function. In those cases,
SSL_want() returns a code specific to the type of async processing
needed.
The create_ssl_connection() helper function for the tests is very
helpful for several things, including creating API tests. However,
it does not currently let us test the async processing functionality
of these callback interfaces, because the special SSL error codes
are treated as generic errors and the helper continues to loop until
it reaches its maximum iteration count.
Add a new parameter, 'want', that indicates an expected/desired
special SSL error code, so that the helper will terminate when
either side reports that error, giving control back to the calling
function and allowing the test to proceed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Simple tests only need to implement register_tests().
Tests that need a custom main() should implement test_main(). This will
be wrapped in a main() that performs common setup/teardown (currently
crypto-mdebug).
Note that for normal development, enable-asan is usually
sufficient for detecting leaks, and more versatile.
enable-crypto-mdebug is stricter as it will also
insist that all static variables be freed. This is useful for debugging
library init/deinit; however, it also means that test_main() must free
everything it allocates.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Clang was complaining about some unused functions. Moving the stack
declaration to the header seems to sort it. Also the certstatus variable
in dtlstest needed to be declared static.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Injects a record from epoch 1 during epoch 0 handshake, with a record
sequence number in the future, to test that the record replay protection
feature works as expected. This is described more fully in the next commit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add a test to inject a record from the next epoch during the handshake and
make sure it doesn't get processed immediately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Matt Caswell
Dimitri Papadopoulos
Dr. David von Oheimb
Kurt Roeckx
Antoine Cœur
Shane Lontis
Richard Levitte
Alfred E. Heggestad
Pauli
Benjamin Kaduk
Emilia Kasper