- add test vectors for tls1_3 integrity-only ciphers
- recmethod_local.h: add new member for MAC
- tls13_meth.c: add MAC only to tls 1.3
- tls13_enc.c: extend function to add MAC only
- ssl_local.h: add ssl_cipher_get_evp_md_mac()
- s3_lib.c: add the new ciphers and add #ifndef OPENSSL_NO_INTEGRITY_ONLY_CIPHERS
- ssl_ciph.c : add ssl_cipher_get_evp_md_mac() and use it
- tls13secretstest.c: add dummy test function
- Configure: add integrity-only-ciphers option
- document the new ciphers
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22903)
This fixes a couple of copy and paste error from EVP_MD_CTX_dup,
where: EVP_CIPHER_CTX_dup is useful to avoid multiple
EVP_CIPHER_fetch (instead of EVP_MD_fetch) and returns
EVP_CIPHER_CTX (instead of EVP_MD_CTX).
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24376)
The semantics of such concurrent call is not defined.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24275)
This function is only useful for EAP-FAST, but was previously undocumented.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24309)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23768)
Introduce the capability to retrieve and update Certificate Revocation Lists
(CRLs) in the CMP client, as specified in section 4.3.4 of RFC 9483.
To request a CRL update, the CMP client can send a genm message with the
option -infotype crlStatusList. The server will respond with a genp message
containing the updated CRL, using the -infoType id-it-crls. The client can
then save the CRL in a specified file using the -crlout parameter.
Co-authored-by: Rajeev Ranjan <ranjan.rajeev@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23768)
Previously the documentation for `SSL_CIPHER_description` said:
> If buf is provided, it must be at least 128 bytes, otherwise a buffer
> will be allocated using OPENSSL_malloc().
In reality, `OPENSSL_malloc` is only invoked if the provided `buf`
argument is `NULL`. If the `buf` arg is not `NULL`, but smaller than
128 bytes, the function returns `NULL` without attempting to allocate
a new buffer for the description.
This commit adjusts the documentation to better describe the implemented
behaviour.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23921)
Several of the attribute values defined for use by attribute certificates
use multi-valued data in an ASN.1 SEQUENCE. Allow reading of these values
from a configuration file, similar to how generic X.509 extensions are
handled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
The IETFAtrrSyntax type is used for the values of several attributes
defined in RFC 5755 for use with attribute certificates.
Specifically this type is used with the "Charging Identity" and
"Group" attributes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Add API to manage attribute certificate extensions
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Add functions to print an attribute certificate. Several
attribute value types defined by the RFC 5755 specification
are multi-field values (i.e ASN1_SEQUENCE rather than an ASN1_STRING
or similar format). Currently those values are printed using
`ASN1_item_print`. A more user-friendly output mechanism (maybe
similar to the i2r_ functions used for X509 extensions) could be
added in future.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Only fields that are allowed by RFC 5755 are
accessible through this API. Fields that are only supported
in version 1 attribute certificates (e.g. the AttCertIssuer
v1Form fields) are not implemented.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Add support for attribute certificates (v2) as described
in RFC 5755 profile.
Attribute certificates provide a mechanism to manage authorization
information separately from the identity information provided by
public key certificates.
This initial patch adds the ASN.1 definitions
and I/O API. Accessor functions for the certificate fields
will be added in subsequent patches.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Create a new hashtable that is more efficient than the existing LHASH_OF
implementation. the new ossl_ht api offers several new features that
improve performance opportunistically
* A more generalized hash function. Currently using fnv1a, provides a
more general hash function, but can still be overridden where needed
* Improved locking and reference counting. This hash table is
internally locked with an RCU lock, and optionally reference counts
elements, allowing for users to not have to create and manage their
own read/write locks
* Lockless operation. The hash table can be configured to operate
locklessly on the read side, improving performance, at the sacrifice
of the ability to grow the hash table or delete elements from it
* A filter function allowing for the retrieval of several elements at a
time matching a given criteria without having to hold a lock
permanently
* a doall_until iterator variant, that allows callers which need to
iterate over the entire hash table until a given condition is met (as
defined by the return value of the iterator callback). This allows
for callers attempting to do expensive cache searches for a small
number of elements to terminate the iteration early, saving cpu cycles
* Dynamic type safety. The hash table provides operations to set and
get data of a specific type without having to define a type at the
instatiation point
* Multiple data type storage. The hash table can store multiple data
types allowing for more flexible usage
* Ubsan safety. Because the API deals with concrete single types
(HT_KEY and HT_VALUE), leaving specific type casting to the call
recipient with dynamic type validation, this implementation is safe
from the ubsan undefined behavior warnings that require additional
thunking on callbacks.
Testing of this new hashtable with an equivalent hash function, I can
observe approximately a 6% performance improvement in the lhash_test
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23671)
Generally we can get away with just using CRYPTO_atomic_load to do
stores by reversing the source and target variables, but doing so
creates a problem for the thread sanitizer as CRYPTO_atomic_load hard
codes an __ATOMIC_ACQUIRE constraint, which confuses tsan into thinking
that loads and stores aren't properly ordered, leading to RAW/WAR
hazzards getting reported. Instead create a CRYPTO_atomic_store api
that is identical to the load variant, save for the fact that the value
is a unit64_t rather than a pointer that gets stored using an
__ATOMIC_RELEASE constraint, satisfying tsan.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23671)
And add a note how to perform side-channel free error stack handling.
Signed-off-by: Hubert Kario <hkario@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24159)
Signed-off-by: fanqiaojun <fanqiaojun@yeah.net>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24128)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
They take non-const STACK_OF(TYPE)* argument.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24023)
Fixes#23075
In OpenSSL 3.2 EVP_DigestSign and EVP_DigestVerify
were changed so that a flag is set once these functions
do a one-shot sign or verify operation. This PR updates the
documentation to match the behaviour.
Investigations showed that prior to 3.2 different key
type behaved differently if multiple calls were done.
By accident X25519 and X448 would produce the same signature,
but ECDSA and RSA remembered the digest state between calls,
so the signature was different when multiple calls were done.
Because of this undefined behaviour something needed to be done,
so keeping the 'only allow it to be called once' behaviour
seems a reasonable approach.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23834)
Also removal of duplicate assignment and addition of comment
in test/http_test.c
Follow up change to PR #23781
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23837)
In the man page for SSL_add_dir_cert_subjects_to_stack(), the functions
returning int have undocumented return values.
Fixes#23171
Signed-off-by: Shakti Shah <shaktishah33@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23433)
Change introduces a default limit on HTTP headers we expect to receive
from server to 256. If limit is exceeded http client library indicates
HTTP_R_RESPONSE_TOO_MANY_HDRLINES error. Application can use
OSSL_HTTP_REQ_CTX_set_max_response_hdr_lines() to change default.
Setting limit to 0 implies no limit (current behavior).
Fixes#22264
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23781)
Fixes#23655
BIO_get_new_index() returns a range of 129..255.
It is set to BIO_TYPE_START (128) initially and is incremented on each
call.
>= 256 is reserved for the class type flags (BIO_TYPE_DESCRIPTOR) so it
should error if it reaches the upper bound.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23732)
docs say the SSL object in this function is const, but the api doesn't
qualify it as such. Adjust the docs to match the definition
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23785)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21660)
The EVP_DigestInit(3) manual page contains wrong name for the define
macro for the OSSL_DIGEST_PARAM_MICALG param.
Fixes#23580
CLA: trivial
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23615)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23535)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23535)
Ruslan Baratov
Rajeev Ranjan
Daiki Ueno
Hongren Zheng
Tomas Mraz
Matt Caswell
sapph2c
Dr. David von Oheimb
Daniel McCarney
Damian Hobson-Garcia
Neil Horman
Hubert Kario
Dimitri Papadopoulos
Richard Levitte
slontis
Alexandr Nedvedicky
Shakti Shah
Hugo Landau
Ijtaba Hussain
Bernd Ritter